The MagDrone R3 is a ultra portable magnetometer survey kit to be attached to any UAV / drone with a minimum payload of 1kg.
Ready to go
The kit consists of an ultra light weight sensor tube with two built-in 3-axis Fluxgates with 150pT resolution, a 1-button data logger with internal SD card, rechargeable batteries and an integrated GPS. It is made and optimized for small and mid size survey UAVs / drones that are shaped for less payload and longer flight times.
Compact setup
Thanks to the 200Hz sampling rate the MagDrone R3 can directly attached to the landing gear of a drone - even in closest distance to the motors! Compared to others, the MagDrone R3 can distinguish between motor noise, net frequencies, temporary interferences and ground signal.
Universal usage
Depending on capabilities of the UAV / drone in terms of maneuverability and GPS precision, the MagDrone R3 survey kit can be used for general purpose surveys, science related magnetic cartographies, exploration studies on hidden minerals, as well as for safety relevant operations. Those can include area scanning for bombs and ammunition, as well as preventive surveillance of areas and camps against intrusion.
SimplicityÂ
The frame ensures an easy attachment to any kind of UAV / drone by screwing, strapping or bonding both together.
Intuitive science
The data logger is continuously recording while in air. Afterwards the data can be downloaded to any Windows® computer to further process the measurement values i.e. using the SENSYS software MagDrone DataTool, MAGNETO®,GIS tools or Matlab for own scripting.
MagBase
Together with the SENSYS tool MagBase acting as a reference station, the drone based magnetometer data can be correlated with those from the MagBase. That will enable the cancellation of temporary noise sources such as crossing vehicles or net frequencies.
ENSYS Remote App
with the Android Remote App user can establish a Bluetooth connection between MagDrone R3 and their Smartphone to check system condition prior and after flying, initiate or stop data recording as well as see live readings at 2Hz sampling rate to check system, ground and environmental conditions. Get your App from the Google PlayStore!
This ain’t be enough information? Get in contact with us! Find us on LinkedIn | YouTube | Facebook | Instagram
| Technical Data MagDrone R3 | |
|---|---|
| General Technical Data | |
| Power Supply | 11.1 V; 1,950 mAh Li-Ion re-chargeable battery |
| Operating Temperature | -20°C to +50°C |
| Weight / with Li-Ion battery | 750 g / 884 g |
| Overall power consumption | 500 mA |
| Sensor tube dimensions (W x D x H) | 1,070 x 22 mm |
| FGM3D/75 Fluxgate | |
| Number and orientation of sensors | 2 pieces, laid horizontal, parallel |
| Specified measurement range | ±75,000 nT (higher ranges available on request) |
| Number of sensor axis | 3 |
| Distance between sensor centre points | 1,000 mm |
| Datalogger | |
| Power | 50 mA |
| Sensor input | Internal wired |
| User Interface | On/Off + Start/Stop button; status LED |
| Survey mode | Recording when start/stop pressed |
| Sampling rate | 200 Hz (higher rates available on request) |
| Internal memory | 2 GB |
| Datalogger dimensions (W x D x H) | 230 x 128 x 43/73 mm |
| Standard package | |
| MagDrone R3 | Sensor tube, 2 pcs. built-in FGM3D/75 sensors, data logger (fixed to tube), 2 pcs. rechargeable batteries |
| Rugged case (W x D x H) | 1120 x 290 x 110 mm |
| Internal GPS | U Blox PAM-7Q |
| Peripherals | Data transfer cables (USB), set of internat. power plugs, wall charger, accessory bags, USB memory stick with software |
| Documentation | Certificate, manual, quick guide |
| PC software | MagDrone DataTool |
| Optional accessories | |
| Data processing | MAGNETO® Software |