The SENSYS TDX is a high end data logger with 15 input channels for five (5) SENSYS FGM3D Fluxgates as well as an additional digital RS232 based input for a third party sensor.
All 15 channels can be sampled with up to 2,000 Hz at the same time and fully synchronized. The Magnetometer signals will be digitized with 24Bit.
The RS232 extension port allows for integration of an additional sensor, i.e. to measure temperature, altitude or the angle of a spinning measurement table as done for a client DLR for measurement of magnetic impact of satellite components prior their deployment into space.
The TDX can be connected to a PC or network via the LAN interface. A server tool allows for remote access and configuration of connection and output parameters. A live streaming allows a direct input into client’s third party systems.
The TDX is temperature calibrated to ensure highest accuracy throughout all measurement campaigns.
|General Technical Data|
|Power supply||1x IEC 60320 C14; internal 220/240 Vac power supply unit; 150 W max.|
|Operating Temperature||0 … +40 °C|
|Storage Temperature||-20 … +60 °C|
|Humidity||10 … 90 %, non condensing|
|Dimensions (W x D x H)||211 x 270 x 120 mm|
|FGM3D sensor input||5x D-Sub 15 pins HD; simultaneously sampled|
|Input Measurement Range||± 10 V|
|Maximum Allowed Input Voltage||± 30 V|
|Sample Rate||200 ... 2000 Hz (selectable via software)|
|Input Impedance||typ. 100 KΩ|
|Accuracy||calibrated (0 ... 40°C)1||uncalibrated at 25°C|
|- Gain Accuracy||max. 0.05 %||max. 0.2 %|
|- Offset accuracy||max. 0.2 mV||max. 2 mV|
|Analogue Antialiasing Filter||Low-Pass, typ. f-3dB = 48 kHz|
|Digital Antialiasing Filter||Pass-band flatness: 100 dB; 0.55 * fS to 127 * fS|
|Integrated Sensor Supply||± 15 V, max. 50 mA per sensor|
|Extension port||1x digital RS232 via D-Sub 17 pins|
|Galvanic Isolation||100 Vdc max.|
|Data Rate RS232||Up to 921,600 Baud|
|Integrated Output Supply||24 V, max. 1A|
|Ethernet port||1x RJ45 LAN 10/100 Mbit/s|