The kit consists of a Carbon fibre sensor tube with two built-in 3-axis Fluxgates, a 1-button data logger with internal SD card, rechargeable batteries, an integrated or external GPS as well as a serial live data output. With the ergonomical handle and the weight of just 1,600g it is easy to keep in hand.
The MagWalk is made and for small and mid size field studies.
Combining the MagWalk with the SENSYS Remote Smartphone App allows 2 Hz live readings of all single axes of the sensors as well showing absolute values and graphs for in-situ trials and investigations.
The system comes in a hard case to protect the highly sensitive survey kit.
|Technical Data MagDrone R3|
|General Technical Data|
|Power Supply||11.1 V; 1,950 mAh Li-Ion re-chargeable battery|
|Operating Temperature||-20°C to +50°C|
|Weight / with Li-Ion battery||1,470 g / 1,600 g|
|Overall power consumption||500 mA|
|Sensor tube dimensions (W x D x H)||1,070 x 22 mm|
|Number and orientation of sensors||2 pieces, laid horizontal, parallel|
|Specified measurement range||±100,000 nT (higher ranges available on request)|
|Number of sensor axis||3|
|Distance between sensor centre points||1,000 mm|
|Sensor input||Internal wired|
|User Interface||On/Off + Start/Stop button; status LED|
|Survey mode||Recording when start/stop pressed|
|Sampling rate||200 Hz (higher rates available on request)|
|Internal memory||2 GB|
|Datalogger dimensions (W x D x H)||230 x 128 x 43/73 mm|
|MagDrone R3||Sensor tube, 2 pcs. built-in FGM3D/75 sensors, data logger (fixed to tube), 2 pcs. rechargeable batteries|
|Rugged case (W x D x H)||1120 x 290 x 110 mm|
|Internal GPS*||U Blox PAM-M8Q|
|Peripherals||Data transfer cables (USB), set of internat. power plugs, wall charger, accessory bags, USB memory stick with software|
|Documentation||Certificate, manual, quick guide|
|PC software||MagDrone DataTool|
|Data processing||MAGNETO® Software|
|*External GPS||GPS interface optionally to connect an external GPS instead of using the internal GPS|