Following the introduction, the SBL10 is a very compact handheld device for the detection of ferromagnetic objects in the ground and one of the best-selling products from SENSYS. Weighing only 3.7 kg and with a clear control display, it is easy and intuitive to use. Due to its folding mechanism, it requires no assembly and is ready for use within seconds. All the features and supplements to the device attract customers worldwide to use it.
When being used with an additional probe FGM400/38 and cable (simply connected to the top of the SBL10 control unit) the device is ready for borehole or underwater surveys.
The measurement range of both probes is ±30,000nT and enables detection of small pieces as well as of deeply buried heavy objects in depths of five to six meters.
Three different modes allow for surveys on clear or noisy ground as well as in front of fences or rails.
Two battery compartments are used in sequence with an intelligent power management to ensure more than 100 working hours with only one set of standard LR20 batteries.
The connection of the additional probe as well as wireless connectable rugged PDA for data recording always keeps the SBL10 as slim as possible but as flexible as needed. Furthermore, the SENSYS MonSX software on the PDA for data recording also allows for an instant view of the covered field as color coded map. That allows a first intepretation of the operator whilst in the field. On top, all parts fit into a light weight fully rugged casing that is easy to store and transport.
With SENSYS GO we introduce an Android based app for data logging for SBL10, DBL15 and the BM2 borehole systems. This not only replaces the Windows CE-based MonSX, but also enables the expansion of cloud-based functions, faster color map creation and data checking while still on site, and the binding of smartphone-typical sensor systems.
|General technical data|
|Power Supply||4.5 V|
|Battery||2x3 batteries 1.5 V single cell LR20|
|Battery Life||6 batteries = approximately 120 hours|
|Operating Temperature||-20°C to +60°C|
|Operating Weight (without casing)||3.7 kg (incl. 6 batteries)|
|Dimensions (L x W x H) when folded||950 x 130 x 200 mm|
|Visible measurement range||±30,000 nT|
|Display||Analogue pointer with ±10 scale division;|
|Resolution||0.075 nT at 0.3 nT measurement range|
|SBL10 probe*||FGM400/38* (optional)|
|Maximum ambient field||±75,000 nT||±75,000 nT|
|Specified measurement range||±38,460 nT||±38,460 nT|
|Sensor Element Spacing||400 mm||400 mm|
|Point of reference||378 mm**/4 mm***||378 mm**/4 mm***|
|Declination||±3 nT||±3 nT|
|Resolution||0.2 nT||0.2 nT|
|Noise||<40 pT/√Hz @ 1Hz||<40 pT/√Hz @ 1Hz|
|Cut off frequency (Bandwidth)||20 Hz||20 Hz|
|Temperature drift||<0,3 nT/K||<0,3 nT/K|
|Drift over time||t.b.d.||t.b.d.|
|Uncertainty of measurement||1,000 nT/1%****||1,000 nT/1%****|
|Linearity||±4 nT / <0.01%","±4 nT / <0.01%"],["Compensation range ","n.a.","n.a."],["Probe Diameter","40 mm","35 mm"],["IP code","IP65","IP68K 100m available"],["","",""],["Casing|
|Dimensions (L x W x H)||1,040 x 330 x 180 mm|
|Rugged PDA (optional with Bluetooth dongle)||For borehole and single channel measurements|
|Connection cable||15 m, sealed; other lengths on request|
|Head phone||Customizable cable length|
|Soft carry bag||1.5 kg (empty)|
|2-point carry belt|