The MagBase is a magnetometer based reference station for correction or noise cancelling of borehole, aerial or field measurements done with SENSYS systems, such as the MagDrone R3 or the MAGNETO BM2.
The system consists of a data logger, a FGM3D/75 Fluxgate magnetometer and a tripod. The magnetometer is a tri-axial Fluxgate magnetometer, measuring all three components of the Earth‘s magnetic field. The sensor has a measurement range of +/-75,000nT and is mounted in a carbon fiber tube.
The data logger has a built-in GPS receiver, sending the position to the logger once per second. The device comes with it's own power supply consisting of one 12V, 7Ah Lead-Gel-Battery. An appropriate charger is part of the delivery.
The MagBase kit is designed for stationary monitoring of the Earth’s magnetic field. The gathered data can be used in collaboration with other magnetic measurements (e.g. science related magnetic cartographies, borehole surveys with the BM2, aerial surveys with the MagDrone R3 or One, etc.) to correlate or correct survey data.
|General Technical Data|
|Power Supply||12 V; 7Ah Lead-gel battery|
|Operating Temperature||-20°C to +50°C|
|Overall power consumption||500 mA|
|Number of sensors||1 piece|
|Specified measurement range||±75,000 nT (higher ranges available on request)|
|Number of sensor axis||3|
|User Interface||On/Off + Start/Stop button; status LED|
|Survey mode||Recording when start/stop pressed|
|Sampling rate||200 Hz (higher rates available on request)|
|Internal memory||2 GB|
|Data logger dimensions (W x D x H)||220 x 220 x 50/70 mm|
|MagBase||Data logger, one FGM3D/75 sensor, tripod, 7Ah battery|
|Rugged case (W x D x H)||660 x 500 x 330 mm|
|Internal GPS||U Blox PAM-7Q|
|Peripherals||Data transfer cables (USB), set of internat. power plugs, battery charger, accessory bags, USB memory stick with software|
|Documentation||Certificate, manual, quick guide|
|PC software||MagDrone DataTool|
|Data processing||MAGNETO® Software|