on the SENSYS GEOMIL test field
In the following, the GEOMIL test field on the SENSYS company premises was probed with the MagDrone R1 attached to a DJI M350 RTK equipped with UgCS Skyhub and RTK on December 3, 2024 under light air conditions and at an outside temperature of around 5°C. The flight path with 50cm track distance can be seen in Figure 3. The flight speed was 1.5m/s. The achieved flight height above ground was 0.15m for the magnetic sensor and 1.30m for the drone.
The data was evaluated with the MagDrone DataTool 03.04-04/00 and visualized with MAGNETO® 03.01-19/00. The export parameters are 2Hz cut-off frequency for Low-Pass-Filter and moving median with 15m window length for compensation. After filtering a system noise of about 0.24nT could be achieved.
As a reference, the measurement is also compared with the magnetic measurement using the SENSYS MX V3 multi-channel system.
The results are impressive, as most of the objects were detected!
Measurement with the MagDrone R1
Reference measurement with the MX V3 multichannel magnetic system
See the report for more information.
–
This ain’t be enough information? Get in contact with us! If you don’t want to miss any NEWS anymore, please follow us on our social media channels!
